The Tour AD QUATTROTECH MD shafts were designed and are manufactured exclusively at the Graphite Design factory headquarters in Japan. Available in 4 weight categories of 53, 63. 73 and 83 grams, the Tour AD QUATTROTECH MD shafts are a variation of the very successful Tour AD QUATTROTECH shafts. The QUATTROTECH MD designs utilize the Axial Composite Interlace or “ACI” material technology with the special 4 Axis weave material located in the tip section if the shaft which results in lower trajectory ball flight with optimum spin. Revolutionary technology, design and the most advanced materials are trademarks in all Graphite Design shafts, resulting in the highest quality premium golf shafts on the market today. Validating the company’s “Tour AD” logo, all of Graphite Design’s Tour proven shafts are specifically designed to promote a gain in Accuracy and Distance.
Features & Technology:
- 50 ton ultra-premium, high modulus, aerospace quality carbon fiber materials.
- Graphite Design proprietary Axial Composite Interlace (ACI) design philosophy and technology.
Bend Profile:
| BUTT Section | MID Section | TIP Section |
|---|---|---|
| MEDIUM | FIRM | MEDIUM |
Performance:
- Designed to promote Low/Mid to Mid launch angles with Low/Mid to Mid ball spin rates.
- MSRP $500
Fitting:
| 71-85 MPH | 86-95 MPH | 92-98 MPH | 96-105 MPH | 105+ MPH |
|---|---|---|---|---|
| R2 Flex (Lite/ Senior) |
R1 Flex (Regular) |
SR Flex (Stiff Regular) |
S Flex (Stiff) |
X Flex (X-Stiff) |
Tip Trimming for Std Bore:
| Driver | 3 Wood | 5 Wood | 7 Wood | 9 Wood |
|---|---|---|---|---|
| 1.0″ | 1.5″ | 2.0″ | 2.0″ | 2.0″ |
- Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
- Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage. For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0″.
- Improper installation may affect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.
Specifications:
| Shaft Type | Part Number | Flex | Length | Wt. | Tip OD | Tip Para. | Butt OD | Torque | Kick pt | Launch | Spin |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TOUR AD MD 5 R2 | ADQMD5-R2 | Lite/ Senior | 46″ | 52g | .335″ | 4.0″ | .600″ | 5.9 | MID | MID | MID |
| TOUR AD MD 5 R1 | ADQMD5-R1 | Regular | 46″ | 53g | .335″ | 4.0″ | .602″ | 5.9 | MID | MID | MID |
| TOUR AD MD 5 S | ADQMD5-S | Stiff | 46″ | 55g | .335″ | 4.0″ | .604″ | 5.9 | MID | MID | MID |
| TOUR AD MD 6 SR | ADQMD6-SR | Stiff Regular | 46″ | 61g | .335″ | 4.0″ | .598″ | 3.6 | MID | MID | MID |
| TOUR AD MD 6 S | ADQMD6-S | Stiff | 46″ | 63g | .335″ | 4.0″ | .600″ | 3.5 | MID/ HIGH | LOW/ MID | LOW/ MID |
| TOUR AD MD 6 X | ADQMD6-X | X-Stiff | 46″ | 65g | .335″ | 4.0″ | .602″ | 3.5 | MID/ HIGH | LOW/ MID | LOW/ MID |
| TOUR AD MD 7 S | ADQMD7-S | Stiff | 46″ | 72g | .335″ | 4.0″ | .598″ | 3.3 | MID/ HIGH | LOW/ MID | LOW/ MID |
| TOUR AD MD 7 X | ADQMD7-X | X-Stiff | 46″ | 73g | .335″ | 4.0″ | .600″ | 3.3 | MID/ HIGH | LOW/ MID | LOW/ MID |
| TOUR AD MD 8 S | ADQMD8-S | Stiff | 46″ | 82g | .335″ | 4.0″ | .602″ | 3.1 | MID/ HIGH | LOW/ MID | LOW/ MID |
| TOUR AD MD 8 X | ADQMD8-X | X-Stiff | 46″ | 83g | .335″ | 4.0″ | .604″ | 3.1 | MID/ HIGH | LOW/ MID | LOW/ MID |
Where to Buy (Click here or on map to view store locations)
Click on the map to find a location near you
