The Tour AD QUATTRO TECH series, available in 4 weight categories of 55g, 65g, 75g and 85g, incorporates the high tech Axial Composite Interlace or “ACI” material technology in the form of a very special 4 Axis weave material, thus the name “QUATTRO TECH”. This special ACI technology extends from the butt of the shaft down to 4.0” from the tip of the shaft. All of the Tour AD QUATTRO TECH models have a high trajectory tip design for a higher ball launch and mid to high ball spin. The feel and control are unlike any other golf shaft and they work very well in Fairway woods as well as in Drivers. Revolutionary technology, design and the most advanced materials are trademarks in all Graphite Design shafts, resulting in the highest quality premium golf shafts on the market today. Validating the company’s “Tour AD” logo, all of Graphite Design’s Tour proven shafts are specifically designed to promote a gain in Accuracy and Distance.
Features & Technology:
- 50 ton ultra-premium, high modulus, aerospace quality carbon fiber materials.
- Graphite Design Axial Composite Interlace (ACI) design technology.
- Graphite Design proprietary Material Stiffness Integration (MSI) design philosophy and technology.
Bend Profile:
| BUTT Section | MID Section | TIP Section |
|---|---|---|
| FIRM | MEDIUM | SOFT |
Performance:
- Designed to promote Mid/High to High launch angles with Mid to Mid ball spin rates.
- MSRP $500
Fitting:
| 71-85 MPH | 86-95 MPH | 92-98 MPH | 96-105 MPH | 105+ MPH |
|---|---|---|---|---|
| R2 Flex (Lite/ Senior) |
R1 Flex (Regular) |
SR Flex (Stiff Regular) |
S Flex (Stiff) |
X Flex (X-Stiff) |
Tip Trimming for Std Bore:
| Driver | 3 Wood | 5 Wood | 7 Wood | 9 Wood |
|---|---|---|---|---|
| 0″ | 0.5″ | 1.0″ | 1.0″ | 1.0″ |
- Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
- Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage. For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0″.
- Improper installation may affect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.
Specifications:
| Shaft Type | Part Number | Flex | Length | Wt. | Tip OD | Tip Para. | Butt OD | Torque | Kick pt | Launch | Spin |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TOUR AD QT 5 R2 | ADQTECH55-R2 | Lite/ Senior | 46″ | 57g | .335″ | 3.0″ | .595″ | 5.5 | LOW | HIGH | MID |
| TOUR AD QT. 5 R1 | ADQTECH55-R1 | Regular | 46″ | 58g | .335″ | 3.0″ | .595″ | 5.5 | LOW | HIGH | MID |
| TOUR AD QT 5 S | ADQTECH55-S | Stiff | 46″ | 59g | .335″ | 3.0″ | .595″ | 5.5 | LOW | HIGH | MID |
| TOUR AD QT 6 SR | ADQTECH65-SR | Stiff Regular | 46″ | 68g | .335″ | 3.0″ | .606″ | 3.8 | LOW | HIGH | MID |
| TOUR AD QT 6 S | ADQTECH65-S | Stiff | 46″ | 69g | .335″ | 3.0″ | .606″ | 3.8 | LOW | HIGH | MID |
| TOUR AD QT 6 X | ADQTECH65-X | X-Stiff | 46″ | 70g | .335″ | 3.0″ | .606″ | 3.6 | LOW/ MID | MID/ HIGH | MID |
| TOUR AD QT 7 S | ADQTECH75-S | Stiff | 46″ | 77g | .335″ | 3.0″ | .610″ | 3.4 | LOW | HIGH | MID |
| TOUR AD QT 7 X | ADQTECH75-X | X-Stiff | 46″ | 78g | .335″ | 3.0″ | .610″ | 3.1 | LOW/ MID | MID/ HIGH | MID |
| TOUR AD QT 8 S | ADQTECH85-S | Stiff | 46″ | 88g | .335″ | 3.0″ | .614″ | 3.1 | LOW | HIGH | MID |
| TOUR AD QT 8 X | ADQTECH85-X | X-Stiff | 46″ | 89g | .335″ | 3.0″ | .614″ | 2.9 | LOW/ MID | MID/ HIGH | MID |
Where to Buy (Click here or on map to view store locations)
Click on the map to find a location near you
